Table of Contents
Advertisement
A.2
Expansion Memory Modules
Note
To expand the printer memory for more complex print jobs and faster print speed, you can plug
in optional memory modules (dual in line memory modules) in two memory slots provided on
the printer main controller board. You can select additional memory modules from 32, 64, or
128 MB (the maximum memory size is 256 MB, including the base 64 MB memory).
Only an authorized Kyocera Mita dealer should install the expansion memory. Kyocera
Mita shall not be liable for any damages caused by improper installation of expansion
memory.
Precautions on handling the printer's main controller board and memory
modules
•
To protect electronic parts, discharge static electricity from your body by touching a water
pipe (faucet) or other large metal object before handling the memory modules. Or, wear an
antistatic wrist strap, if possible, when you install the memory modules.
•
Always hold the main controller board or a memory module by its edges as
shown below to avoid damaging electronic parts.
Figure A-2
A-3
Expansion Memory Modules
YES
NO
Advertisement
Table of Contents
