3.13 Other Modes
3.13.4 Received Data Dump
5
To change the timeout time, press the ENTER key. A blinking cursor (_) appears.
>Sleep Timer
030min.
6
Press the
or
the desired time. The timer can be set between 5 and 240 min, in 5-minute increments.
Use the
and
7
When the desired timeout time is displayed, press the ENTER key.
8
To exit the menu selection, press the MENU key.
You can print data received by the printer as hexadecimal code for debugging programs and
files.
1
Press the MENU key.
2
Press the
or
Others
3
Press the
key.
4
Press the
or
>Print HEX-DUMP
5
Press the ENTER key. A question mark (?) appears.
>Print HEX-DUMP?
>
key to increase or decrease the value at the blinking cursor and set
keys to move the cursor right and left.
key repeatedly until Others > appears.
>
key repeatedly until > Print HEX-DUMP appears.
3-108