Selecting The Paper Feed Source - Kyocera Mita FS-8000CD Operation Manual

3.10 Paper Handling

3.10.5 Selecting the Paper Feed Source

You can select the paper source using the operator panel, from which the printer feeds paper as
the default. If an optional paper feeder(s) is installed, it is also available for the default paper
source.
1
Press the MENU key.
2
Press the or
Paper Handling >
3
Press the key.
4
Press the or
>Feed Select
Cassette 1
5
To change the current paper feed source, press the ENTER key. A blinking question
mark (?) appears.
>Feed Select
? Cassette 1
6
Press the or
toggles through the following paper feed sources, depending on the installed optional
paper feeders (from the top most paper cassette to the bottom paper cassette):
MP tray
Cassette 1
Cassette 2
Cassette 3
Cassette 4
Cassette 5
Cassette 6
Cassettes 3 and 4 are available for selection when an optional paper feeder is installed.
Cassettes 5 and 6 are available for selection when two optional feeders are installed.
The FS-8000CD is equipped with the PD-30 duplex unit as a standard feature, whose
Casette 1 is occupied by the duplexer. Terefore, Cassette 1 is not available for the FS-
8000CD.
7
When the desired paper source displayed, press the ENTER key.
key repeatedly until Paper Handling > appears.
key repeatedly until >Feed Select appears.
key to display the desired paper feed source. The message display
3-84