Printing Using The Printer Driver; Basic Printing Task - Kyocera Mita FS-8000CD Operation Manual

4.4

Printing Using the Printer Driver

4.4.1

Basic Printing Task

This section explains how to proceed with printing using the printer driver. The explanation
below allows you to select the paper source, select the output device, etc., temporarily
overriding the default settings explained in the previous section.
The printer driver online help will describe the printer settings in more detail.
To start printing your document, open the Print dialog (below) from the application software
(File>Print). Then, perform the following:
1
Click the Name drop down list and select the Kyocera Mita FS-8000C KX printer.
2
Select the range of the pages you want to print in the document. To print the whole
document, select All.
3
Specify the number of copies you want to print in the Number of Copies combo box.
4
Click OK. Printing begins when the printer is ready to print.
1
Figure 4-6
2
4
4-9
4.4 Printing Using the Printer Driver
3