Table of Contents
Advertisement
3.6
Making Default Settings
3.6.1
Default Emulation
Using the operator panel, you can set the default for the following items. Note default settings
made using the operator panel may be overridden by the printer driver settings and application
software.
You can change the emulation mode and character code set for the current interface. The
printer is capable of the following emulation modes:
•
HP PCL 5c (HP Color LaserJet 8550)
•
KC-GL (HPGL 7550A)
•
KPDL3 (PostScript 3 Version 3011)
The printer can automatically switch between HP PCL 5c and KPDL3 depending on the print
job that is received from the computer. To do this, select KPDL (AUTO) in the following
procedure.
1
Press the MENU key.
2
Press the
or
One of the emulation modes appears, indicating the emulation currently in use.
PCL 5c (default)
KC-GL
KPDL
KPDL (AUTO)
3
To change the default emulation, press the ENTER key. A blinking question mark (?)
appears.
Emulation
?PCL 5c
4
Press the
or
key repeatedly until Emulation > appears on the message display.
key repeatedly until the desired emulation mode is displayed.
3-47
3.6 Making Default Settings
Advertisement
Table of Contents
