Table of Contents
Advertisement
3.13.7 Alarm (Buzzer) Setting
3
Press the
key.
4
Press the
or
>Resouce Prot.
Off
5
Press the ENTER key. A blinking question mark (?) appears.
>Resouce Prot.
? Off
6
Press the
or
protection.
Permanent
Perm / Temp
7
When the desired resource protection is displayed, press the ENTER key.
8
To exit the menu selection, press the MENU key.
You can set an alarm sound in addition to the message displayed when the paper supply is
exhausted, or when paper jamming occurs. This setting is useful, for example, when the printer
is located some distance from the user.
The audio alarm is set to On when leaving the factory. If the alarm is set to Off, it will not
sound.
1
Press the MENU key.
2
Press the
or
Others
3
Press the
key.
key repeatedly until >Resource Prot. appears.
key to select Permanent or Permanent/Temporary for resource
key repeatedly until Others > appears.
>
3-111
3.13 Other Modes
Advertisement
Table of Contents
