Paper Jam - Side Cover] - Kyocera Mita FS-8000CD Operation Manual

Color printer
Hide thumbs Also See for FS-8000CD:
Table of Contents

Advertisement

Caution
5.4.8
[Paper Jam — Side Cover]
11
Turn the wheel (with gear teeth) on the right-hand side of the primary transfer unit
away from you. The primary transfer unit will turn at the same time. Remove the
jammed paper.
Figure 5-17
Use care not to touch the drum component of the primary transfer unit.
12
Push the primary transfer unit back in. To do this, lower the lock button close to the
bottom end of the lever to unlock the lever. Set the lever (in the position of six o'clock)
back to the original (four o'clock) position. See the figure below.
Green Lever
Lock Button
Figure 5-18
13
Push the fuser unit back in and close the top cover. To close the cover, be sure to pull
the left and right lock levers (the lock levers are green) toward you. See
page
5-20. The top cover cannot be closed properly if you skip this.
14
Close the front cover.
The paper jammed in the face-up tray. After checking and clearing the jam in the face-up tray,
also check the side cover for the face-up tray. Clear any paper jams in these components.
5-23
5.4 Clearing Paper Jams
Gear teeth
Figure 5-11 on

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs-8000cFs-8000cn

Table of Contents