Table of Contents
Advertisement
Selecting the Default Output Destination
The Output tab allows you to select the output destination, such as a document finisher,
sorter, bulk stacker, etc., which will receive the printed pages in all application software.
Before this selection, you must configure the available devices using the previous procedure.
You can temporarily change the default output destination to another from within the
application software.
1
Click the Output tab.
To reach the Output tab under Windows NT 4.0/2000, Click Windows Start, point
to Settings, and click Printers. Right click the printer icon, then click Document
Defaults (Windows NT 4.0) or Printing Preferences (Windows 2000).
2
Click and scroll down the Output to drop down list and select the desired output
destination.
Printer Default delivers the printed pages into the output destination that you set
using the printer's operator panel (MENU>Paper Handling>Stack Select).
Figure 4-4
3
Click OK.
4-7
4.3 Configuring the Printer Properties
Advertisement
Table of Contents
