Table of Contents
Advertisement
7
To change the pen width and/or pen color, press the ENTER key. A blinking question
mark (?) appears.
>KC-GL Pen
Adjust ? Pen (1)
8
Press the
or
9
When the desired pen number is displayed, press the ENTER key.
10
To change the pen width, press the
cursor appears at the width value.
>>Pen(1) Width
02dot(s)
Press the
or
When the desired pen width is displayed, press the ENTER key.
11
To set the pen color, press the
key. A blinking question mark (?) appears.
>>Pen(1) Color
? Black
Press the
or
Yellow, Blue, Magenta, Cyan, White) appears. When the desired pen color is
displayed, press the ENTER key.
12
To set the KC-GL page size, press the
>KC-GL Page Set is displayed.
13
To change the page size, press the ENTER key. A blinking question mark (?) appears.
>KC-GL Page Set
? [A2]
Press the
or
B0, and SPSZ) appears. The SPSZ command sets the paper edge limits to the
dimensions of a standard paper size. See this command
Manual in the CD-ROM.
14
Press the MENU key. The display returns to Ready.
>
key repeatedly until the desired pen number of 1 to 8 appears.
key, then press the ENTER key. A blinking
key repeatedly until the desired pen width in dots (00 to 99) appears.
or
key. To change the pen color, press the ENTER
key repeatedly until the desired pen color (Black, Red, Green,
key twice, then Press the
key repeatedly until the desired page size (A2, A1, A0, B3, B2, B1,
Press the ENTER key to set the page set you just selected.
3-49
3.6 Making Default Settings
or
key until
explained in the Programming
Advertisement
Table of Contents
