3.4.5
Printing a List of Code Jobs
If you select Permanent Job Storage on the printer driver, you can have a List of Code Job
printed using the operator panel. The List of Code Job may be used to read the barcode
assigned for the stored job you want to reprint by using a barcode scanner. See
Options.
A sample Code Job List is shown in
1
Press the MENU key.
2
Press the
or
e-MPS
3
Press the
key.
4
Press the
or
>List of
Code JOB
5
Press the ENTER key. A question mark (?) appears.
>List of
Code JOB ?
6
Press the ENTER key again. The printer prints a Code Job list as shown in
below.
Figure 3-5 on page
key repeatedly until e-MPS > appears.
>
key repeatedly until >List of Code JOB appears.
3-29
Appendix A
3-30.
3.4 e-MPS
Figure 3-5