3.13 Other Modes
3.13.6 Resource Protection
Note
5
To reset the printer, press the ENTER key. A question mark (?) appears.
6
Press the ENTER key again. Self test appears while the printer is resetting itself,
followed by Please wait and then Ready.
Self test
Please wait
Please wait
(Calibrating)
Ready
By default, when you switch from the PCL 5c emulation to another, all downloaded fonts and
macros will be lost. Resource protection preserves these PCL resources in memory so that they
remain intact even when you have switched back in PCL 5c.
Resource protection requires extra memory to store the downloaded fonts and macros.
The total size of the printer memory recommended for using the resource protection
option is affected by several factors. See
By default, resource protection is deactivated. To activate resource protection, proceed as
follows:
1
Press the MENU key.
2
Press the
or
Others
Appendix A
key repeatedly until Others > appears.
>
3-110
Options.