Table of Contents
Advertisement
4
Press the
or
>e-MPS
Configuration
5
Press the
key.
6
Press the
or
>>Quick Copy
7
Press the ENTER key. A blinking cursor (_) appears.
>>Quick Copy
8
Press the
or
can be set between 0 and 50. Use the
9
When the desired maximum number of jobs is set, press the ENTER key.
10
Press the MENU key. The display returns to Ready.
Maximum Space Assigned to Temporary Code Jobs
This changes the hard disk space that holds temporary code jobs. You can change the
maximum space from 0 to 9999 (megabytes). The actual maximum size depends on the size of
free hard disk space, however. The default size is 1/6 of the total hard disk space, rounded off
in unit of 50 MB. For example, if the total hard disk space is 3.2 GB, the default size is 500
MB.
1
Press the MENU key.
2
Press the
or
e-MPS
key repeatedly until >e-MPS Configuration > appears.
>
key repeatedly until >>Quick Copy appears.
32
32
key to increase or decrease the value at the blinking cursor. The value
and
key repeatedly until e-MPS > appears.
>
3-33
keys to move the cursor right and left.
3.4 e-MPS
Advertisement
Table of Contents
