Table of Contents
Advertisement
6
Press the
7
When the data you desire to delete is displayed, press the ENTER key. The message
displays shows Processing and the data is deleted from the storage device.
Formatting a Storage Device
A new memory card or hard disk must be formatted before it can be used in the printer. You
can format the storage device using the printer operator panel.
•
Formatting will destroy any existing data on a storage device.
•
You can format the hard disk using the operator panel when the first time you
installed a new hard disk. About formatting a new hard disk, see also the Installation
Note
Guide of the hard disk for details.
To format a memory card or the hard disk, use the following procedure:
1
Press the MENU key.
2
Press the
Memory Card
3
Press the
4
Press the
>Format
5
Press the ENTER key. A question mark (?) appears.
>Format ?
6
Press the ENTER key. The message display shows Processing while the storage
device is formatted. If you wish to cancel formatting, press the CANCEL key now.
If formatting of the memory card was successfull, the printer automatically prints a
Format Information page as shown below:
or
key to scroll through data in the storage device.
or
key repeatedly until Memory Card > or Hard Disk > appears.
>
key.
or
key repeatedly until >Format appears.
3-75
3.9 Operating the Storage Device
Advertisement
Table of Contents
