Table of Contents
Advertisement
3.4 e-MPS
8
Press the
or
9
Press the ENTER key. If you entered an access code for the printer driver, the ID input
line appears. Enter the four-digit access code entered in the printer driver and press the
ENTER key. To enter the ID, press the
be changed and then enter the correct number by pressing the
10
You can specify the number of copies to print. To increase the copy count, press the
key; to decrease the
>Agenda
Copies
11
Press the ENTER key to finalize the copy count. The printer prints the specified
number of copies for the job.
>Agenda
?Copies
Deleting a Stored Job
1
Follow steps 1 through 8 in the above section.
2
When the title of the job to be printed is displayed (Agenda, in this example), press the
ENTER key. If you entered an access code for the printer driver, enter the four-digit
access code and press the ENTER key.
>Agenda
Copies
3
Press the
key repeatedly until Delete appears for the number of copies.
>Agenda
Delete
4
Press the ENTER key. The stored job is deleted from the hard disk.
key to display the desired job title.
or
key.
001
001
001
3-28
key to move the cursor to the number to
or
key.
Advertisement
Table of Contents
