5.4
Clearing Paper Jams
5.4.1
Possible Paper Jam Locations
If the paper jammed in the paper transport system, or no paper sheets were fed at all, the
Paper jam message appears and the location of the paper jam (the component where the
paper jam has occurred) is also indicated. The printer automatically goes off-line when this
message is displayed. Remove jammed paper. After removing jammed paper, the printer will
re-start printing.
The figure below explains the printer's paper path including the options, for example, the
document finisher and the duplexer (a standard accessory for the FS-8000CD). Possible areas
where paper jam can occur are indicated by the letters
7
below. Paper jams can occur in more than one component on the paper path.
Figure 5-1
Possible location of Jam
A
Feeder 1 Cover
B
Feeder 2 Cover
C
Feeder 3 Cover
D
MP Tray
E
Cassette 1 (FS-8000C/FS-8000CD)
Table 5-7
5-13
5.4 Clearing Paper Jams
through
, each explained in
A
M
Duplex unit
PD-30 (Duplexer +
Paper Feed cassette)
PF-30A
Reference
See
Section 5.4.3 [Paper Jam —
Feeder # Cover] on page
See
Section 5.4.5 [Paper Jam — MP
Tray] on page
5-16.
See
Section 5.4.4 [Paper Jam — Cas-
sette #] on page
5-15.
Table 5-
A
5-15.