Creating Custom Paper Types - Kyocera Mita FS-8000CD Operation Manual

3.10.8 Creating Custom Paper Types

The Type Adjust menu on the operator panel may be used to create a user-defined paper type
for the printer. Custom paper types allow you to optimize printing parameters such as the fuser
temperature best suited for the paper property. It also enables the printer to automatically select
the paper cassette in which the custom paper is loaded as commanded by the printer driver
Up to eight custom user settings may be registered on the operator panel. Creating a custom
paper type using the operator panel is a 4-step job:
• selecting one of eight custom setting positions (Custom 1 through 8)
• selecting the paper weight
• selecting the fuser temperature
• enabling or disabling duplexing for the paper type
Custom paper types can be reset afterwards by following the steps in
the Custom Paper Type on page
Step 1. Selecting the Custom Type Position
1
Press the MENU key.
2
Press the or
Paper Handling >
3
Press the key.
4
Press the or
setting is displayed.
>Type Adjust
Custom 1
5
If you want to change to other custom setting position (Custom 2 to 8), press the
ENTER key. A blinking question mark (?) appears.
>Type Adjust
? Custom 1
3-92.
key repeatedly until Paper Handling > appears.
key repeatedly until >Type Adjust > appears. The first custom
>
3-89
3.10 Paper Handling
Section 3.10.9 Resetting