Table of Contents
Advertisement
4
Attach the grid cleaner to the printer with the pad facing up.
Grid Cleaner
Figure 6-31
5
While pushing the main charger unit lock lever upward as shown in
slightly lift the main charger unit, and gently pull the gray-colored main charger
handle out and push it back in. Repeat this 2 to 3 times. These movements clean the
grid.
Main Charger Unit
Figure 6-32
6
After cleaning is finished, remove the grid cleaner from the printer and discard it.
The grid cleaner cannot be reused. Close the front cover.
If the front cover does not fully close, although the printer shows Ready, open the front
cover and push the main charger unit until it is fully inserted in the printer.
Note
Lock Lever
6-21
6.5 Cleaning the Printer
Figure
6-32,
Advertisement
Table of Contents
