Table of Contents
Advertisement
3.10.10 Selecting the Output Stack
6
Press the ENTER key. All customized paper types, including weight and duplex
printing capability, will be reset to the default. The message display returns to Ready.
The Stack Select menu on the operator panel allows you to select either the face-down tray or
the face-up tray for the output stack. If an optional output device such as the sorter, document
finisher, or bulk stacker, is installed, it can also be selected as an output stack.
1
Press the MENU key.
2
Press the
or
Paper Handling >
3
Press the
key.
4
Press the
or
>Stack Select
Face-down tray
5
To change the output stack, press the ENTER key. A blinking question mark (?)
appears.
>Stack Select
? Face-down tray
6
Press the
or
Face-down tray
Face-up tray
The output stacks change to include the following when an optional bulk stacker or
document finisher is installed:
Face-down tray
Opt.stacker[FU] (Option face-up tray required)
Opt.stacker[FD] (Option face-down tray required)
The output stacks change to include the following when an optional sorter is installed:
Face-down tray
key repeatedly until Paper Handling > appears.
key repeatedly until >Stack Select appears.
key to toggle through the following output stacks:
3-93
3.10 Paper Handling
Advertisement
Table of Contents
