Keys - Kyocera Mita FS-8000CD Operation Manual

3.1 Understanding the Operator Panel
3.1.3

Keys

Note
The operator panel keys are used to configure the printer operation. Note that certain keys
have the secondary function.
The printer has a parallel, serial, and an optional network interface. Configuration to the
printer settings made with these keys affect only one of these interfaces that is currently
active (indicated by the INTERFACE indicator on the message display). See
Indicator (INTERFACE) on page
GO Key
The GO key switches the printer between on-line and off-line. Use this key to:
• Toggle the printer's on-line and off-line states. You can temporarily stop the print job by switching the
printer off-line.
• Print and feed out one page when the printer displays Waiting.
CANCEL Key
This key is used to:
• Cancel a printing job
• Stop the alarm sound
• Reset numeric values or cancels a setting procedure while using menu system
To cancel a printing job:
1
While the printer displays Processing, press the CANCEL key.
Print Cancel? appears on the message display followed by the interface which the
job to cancel is on. The interface is indicated by one of the following message:
Parallel
Serial
Option 1
Option 2
If you wish to abort the cancellation procedure, press the CANCEL key again.
2
Press the ENTER key. Cancelling data appears on the message display and
printing stops after the current page is printed.
3-3.
3-6
Interface