Table of Contents
Advertisement
3.8.4
Gloss Mode
Note
5
To change the toner mode, press the ENTER key. A blinking question mark (?)
appears.
>Tone
? Normal
6
Press the
or
7
Press the ENTER key to finalize the tone mode.
8
Press the MENU key. The display returns to Ready.
The gloss mode, when set to High, increases the effect of glossiness in printing by reducing the
printing speed by half. The gloss mode cannot be used for duplex printing. The gloss mode is
effective for the following paper types:
Plain
Recycled
Vellum
Color
Prepunched
Depending on the paper used, printing in gloss mode may cause wrinkle in paper. To
reduce wrinkle,try using thicker paper.
The default gloss mode is Low. To confirm or change the gloss mode, proceed as follows:
1
Press the MENU key.
2
Press the
or
Print Quality
3
Press the
key.
key to change to Fine.
key repeatedly until Print Quality > appears.
>
3-67
3.8 Setting Print Quality
Advertisement
Table of Contents
