Setting The Sleep Timer - Kyocera Mita FS-8000CD Operation Manual

3.13 Other Modes

3.13.3 Setting the Sleep Timer

5
To change the timeout time, press the ENTER key. A blinking cursor (_) appears.
>Form Feed Time.
Time Out 030sec.
6
Press the or
the desired time. The timeout time can be between 0 and 495 seconds, in 5-second
increments. Use the
7
When the desired timeout time is displayed, press the ENTER key.
8
To exit the menu selection, press the MENU key.
The printer has a sleep timer that is used to conserve power when the printer is not printing,
processing, or receiving data.
You can turn off or on the sleep timer function using the following procedure.
1
Press the MENU key.
2
Press the or
Others
3
Press the key.
4
Press the or
>Sleep Timer
030 min.
5
Press the key and display >>Sleep Mode.
>>Sleep Mode
On
key to increase or decrease the value at the blinking cursor and set
and keys to move the cursor right and left.
key repeatedly until Others > appears.
>
key repeatedly until >Sleep Timer > appears.
>
3-106