Expansion Memory Modules - Kyocera Mita FS-C5016N Operation Manual

A.2

Expansion Memory Modules

To expand the printer memory for more complex print jobs and faster print speed, you can
plug in optional memory modules (dual in line memory modules) in two memory slots
provided on the printer main controller board. You can select additional memory modules
from 32, 64, 128, or 256 MB (the maximum memory size is 608 MB, including the base
96 MB memory).
Only an authorized Kyocera Mita dealer should install the expansion
memory. Kyocera Mita shall not be liable for any damages caused by
improper installation of expansion memory.
Note
Precautions on handling the printer's main controller board and memory
modules
• To protect electronic parts, discharge static electricity from your body by touching a
water pipe (faucet) or other large metal object before handling the memory modules. Or,
wear an antistatic wrist strap, if possible, when you install the memory modules.
• Always hold the main controller board or a memory module by its edges as shown
below to avoid damaging electronic parts.
Figure A-2
A-3
Expansion Memory Modules
YES
NO