Table of Contents
Advertisement
5.3 Error Messages
Message
Option stacker
path error
Option tray ##
paper full
Paper feeder #
side cover open
Paper jam
###############
Paper loading
†††
Print overrun
Press GO
RAM disk error##
Press GO
Remove paper
option tray
##
Replace toner
Clean printer
Replace toner
TK-82 #######
Set paper
Press GO
Side cover
open
Toner low
TK-82 #######
Unsupported
external device
Virtual mail box
full
Warning
low memory
Table 5-3 (Continued)
†
These messages may be displayed altogether such as Install MK [A][B][C][D]
or Install MK [A2][B][C][D].
†† Messages separated by '/' are displayed alternately.
††† After this error has happened, page protect mode will be automatically turned on. To
maintain optimum use of memory during printing, we recommend you manually turn
off page protect mode. See
tect Mode on page
3-60.
Corrective Action
The optional bulk stacker, document finisher, or sorter is not installed
properly. Correct the installation.
A tray of the optional document finisher (DF-31) or sorter (SO-30) is full.
Remove paper sheets in the corresponding tray as displayed in place of ##.
The side cover of paper feeder is open. Close the cover of the paper feeder
1 (topmost) to 3 (bottom) as displayed in place of #.
A paper jam has occurred. The location of the paper jam is indicated in
place of the #'s. For details, see
5-13.
After the paper cassette is closed, papaer loading is in progress in the paper
cassette.
The print job transferred to the printer was too complex to print on a page.
Press the GO key to resume printing. (The page may break in some
pages.).
You can abandon printing by the CANCEL key.
If Auto Continue is set to On, printing will be automatically resumed after
a preset period of time.
A RAM disk error has occurred. Look at the error code given in place of ##
and refer to
Section 5.3.2 Storage Error Codes on page 5-11
RAM disk error, press the GO key.
Paper remains in an option document finisher or sorter tray as displayed in
place of ##. Remove paper sheets.
Two message items are displayed alternately. Toner has run out in the toner
container(s). Replace the toner container using a new toner kit for the par-
ticular color. The printer does not operate when this message is displayed.
For example, if Replace toner C,K is displayed, replace the cyan and
the black toner containers.
The MP tray is out of paper. Load paper and press the GO key. (Note that
feeding the paper having a paper size which does not match the current
paper size from the MP tray can cause paper jam.)
Open the side cover at the printer's left side, then close tightly.
Replace the toner container using a new toner kit. Color of the toner con-
tainer that needs to be replaced is represented by #######: C (Cyan), Y
(Yellow), M (Magenta), and K (black).
A device not supported by the printer is installed. Install an optional bulk
stacker supported by the printer.
The storage area in the hard disk for the virtual mailboxes is full. Print out
accumulated jobs in the virtual mailboxes.
The printer's internal memory is running low due to too many numbers of
fonts and macros downloaded. Try deleting unnecessary fonts and macros.
Chapter 3 Using the Operator Panel, section 3.7.3 Page Pro-
5-10
Section 5.4 Clearing Paper Jams on page
. To ignore the
Advertisement
Table of Contents
