Table of Contents
Advertisement
Message
Load Cassette #
††
(paper size)/(paper type)
Load MP Tray
††
(paper size)/(paper type)
Memory card err
Insert again
Memory overflow
Press GO
MemoryCard err##
Press GO
Missing
duplex drawer
Missing
stapler unit
Missing toner
TK-82 #######
Option interface
error
##
Option stacker
cover open
Option stacker
paper full
Table 5-3 (Continued)
Corrective Action
The paper cassette matching the paper size and paper type of the print job
is empty. Load paper into the paper cassette. The option paper feeder cas-
settes are indicated by #. Press the GO key to resume printing.
Or, if you want to print from a different paper source, press the
to display Use alternative and you can change the source for paper
feeding. After selecting a paper source and pressing the MENU key,
Paper Handling > appears. By pressing the
tings menu appears. After setting the correct paper type, press the ENTER
key and printing starts.
If you want to print from a different paper source, see
Operator Panel, section 3.10.5 Selecting the Paper Feed Source on page
3-84.
There is no paper cassette installed in the printer that matches the paper
size and paper type of the print job. Set paper in the MP tray. Press the GO
key to resume printing. (Note that feeding the paper having a paper size
which does not match the current paper size from the MP tray can cause
paper jam.)
Or, if you want to print from a different paper source, press the
to display Use alternative and you can change the source for paper
feeding. After selecting a paper source and pressing the MENU key,
Paper Handling > appears. By pressing the
tings menu appears. After setting the correct paper type, press the ENTER
key and printing starts.
If you want to print from a different paper source, see
Operator Panel, section 3.10.5 Selecting the Paper Feed Source on page
3-84.
The memory card is accidentally removed from the printer's memory card
slot during reading. If you continue reading the memory card, insert the
same memory card into the slot again. The printer again reads it from the
beginning of the data.
Also see
Insert the same memory
The total amount of data received by the printer exceeds the printer's inter-
nal memory. Try adding more memory. Press the GO key to resume print-
ing. You can abandon printing by the CANCEL key.
If Auto Continue is set to On, printing will be automatically resumed after
a preset period of time.
A memory card error has occurred. Look at the error code given in place of
## and refer to
Section 5.3.2 Storage Error Codes on page
the memory card error, press the GO key
The duplex unit is not installed. Install the duplex unit.
The stapler unit is not installed in the optional document finisher. Install
the stapler unit in the document finisher.
Install the toner container using a toner kit for the particular color. The
printer does not operate when this message is displayed.
A failure has occuerred with the option network interface card. Check the
option network interface card installed in the printer.
The cover of the optional finishers (bulk stacker, document finisher, or
sorter) is open. Close the cover.
The optional bulk stacker (ST-30) tray is full. Remove paper sheets.
5-9
5.3 Error Messages
or
key
key, the paper type set-
Chapter 3 Using the
or
key
key, the paper type set-
Chapter 3 Using the
card.
5-11. To ignore
Advertisement
Table of Contents
