Table of Contents
Advertisement
1.1 Features
1.1.4
Networking
KPDL3 (Kyocera Printer Description Language 3)
The printer uses KPDL3, Kyocera's implementation of the PostScript page description
language Level 3. The printer has 136 fonts that are compatible with Adobe PostScript
fonts. (The printer also has 80 PCL fonts.)
PDF417 two-dimensional bar codes
The printer has the built-in two-dimensional stacked bar codes of PDF 417 (Portable Data
File 417).
Ethernet network interface
The FS-8000CN comes built-in with a 10 Base-T/100 Base-TX network interface card for
readily connecting to a network.
SNMP compliance
The printer complies with Simple Network Management Protocol (SNMP). The SNMP is
used for providing and transferring management information (MIB) between the printer and
the host computer.
Support for network printer monitor utility (KM-NET VIEWER)
Allows network wide management of printers. See the readme file in the Kyocera Mita
Digital Library CD-ROM (comes with the printer) for details.
1-4
Advertisement
Table of Contents
