6.5 Cleaning the Printer
Note
4
Clean the rubber belts using the cleaning cloth.
Be careful not to touch the black, sponge roller (secondary transfer roller) during
cleaning as this may adversely affect print quality.
Figure 6-25
5
Grasping the tab of the separation charger cleaning knob, gently pull the cleaning
knob out and push it back in. Repeat this 5 to 7 times. This cleans the separation
charger wires inside.
Figure 6-26
Rubber Belts
6-18
SecondaryTransfer Roller
Cleaning knob (Green)