3.10 Paper Handling
3.10.9 Resetting the Custom Paper Type
4
To change duplex printing, press the ENTER key. A blinking question mark (?)
appears.
>>Duplex path
? Enable
5
Press the
or
6
Press the ENTER key. The duplex printing capability is changed.
7
To exit the menu selection, press the MENU key.
If you want to reset all custom paper type settings (1 to 8) to the factory default, proceed as
follows:
1
Press the MENU key.
2
Press the
or
Paper Handling >
3
Press the
key.
4
Press the
or
>Reset Type
Adjust
5
To reset all custom paper types, press the ENTER key. A question mark (?) appears.
>Reset Type
Adjust ?
key to change from Enable to Disable.
key repeatedly until Paper Handling > appears.
key repeatedly until >Reset Type Adjust appears.
3-92