Expansion Memory (Dimm) - Kyocera Mita FS-6750 Service Manual

Table 1. 1 Printer specifications—2/2
Temperature/humidity
Altitude
b
Noise
a. Printing the same page in copy mode
b. Excluding peaks; measured at 1m facing printer as per ISO7779
The details outlined in this manual are subject to modification in accordance with
product improvements.

Expansion memory (DIMM)

The following memory DIMMs are available for use with the printer. For more
information about DIMM, see
Note
Table 1. 2 Recommended DIMMs
Manufacturer
Melco Inc.
P R O D U C T
10 to 32.5 °C/20 to 80 % RH
2000 m
Printing—51 dB(A), standby—38 dB(A), sleeping—unmeasur-
ably low
DIMM to be used
Availability of the memory DIMMs, manufacturers, and specifications
may change without notice. No responsibility is assumed by Kyocera
Mita with respect to loss or damage caused by the use of these
DIMMs.
Capacity
16 MB
32 MB
64 MB
128 MB
1-4
I N F O R M A T I O N
Printer specifications
, page 2-7.
Model
PM-HP-16M-KC
PM-HP-32M-KC
PM-HP-64M-KC
PM-HP-128M-KC
FS-6750