Table of Contents
Advertisement
3.13 Other Modes
3.13.8 Auto Continue Setting
4
Press the
or
>Buzzer
On
5
Press the ENTER key. A blinking question mark (?) appears.
>Buzzer
? On
6
Select On or Off using the
7
Press the ENTER key.
8
To exit the menu selection, press the MENU key.
If you encounter an error that still allows you to continue printing (Memory overflow
Press GO, Print overrun Press GO, KPDL error Press GO, and File not
found Press GO), the next received data is automatically printed after a preset period of
time elapses. For example, if the printer is shared over a network and one person causes one of
the above errors, the data sent from the next person is printed after the set period of time
elapses.
1
Press the MENU key.
2
Press the
or
Others
3
Press the
key
key repeatedly until Buzzer appears.
or
key.
key repeatedly until Others > appears.
>
3-112
Advertisement
Table of Contents
