Intfc1 Hssi: Rx - Comtech EF Data CDM-700 Installation And Operation Manual

CDM-700 High Speed Satellite Modem
Front Panel Operation
If Intfc1 Tx:
Intfc1 Tx Clock:
Normal
This feature has been added for compatibility with certain older equipment. Select Normal or
Inverted, using the
If Intfc1 Tx:
Intfc1 Tx Enable:
Enable
This selection activates or deactivates the transmit (Tx) side of this interface. Disabling the Tx
side deactivates it and changes the data rate to 0.
Select Enable or Disable using the
Intfc1 HSSI:
Intfc1 Rx:
Data Buffer Clock Enable
Select Data, Buffer, Clock, or Enable using the
If Intfc1 Rx:
Intfc1 Tx Data:
Datarate
Select Datarate or Invert using the
If Intfc1 Rx Data:
Intfc1 Data Rate:
Rx:032.000000 Mbps
Edit the Rx Data Rate by selecting the digit to be edited, using the
of the digit is then changed using the
Mbps. Note that the modem Symbol Rate limits of 1.0 to 64.0 Msps makes some choices of
Modulation Type, FEC Coding and Data Rate selection invalid.
Once the Rx Data Rate is edited, Press
Clock is selected:
Inverted
◄ ►
arrow keys, to control clock inversion. Press
Enable is selected:
Disable
◄ ►
Rx
Data is selected:
Invert
◄ ►
Datarate is selected:
▲ ▼
ENTER
( E)
( E)
arrow keys. Press
ENTER
◄ ►
arrow keys. Press
( E)
arrow keys. Press
ENTER
arrow keys. The range of values is from 1.0 to 70.0
.
6–35
Revision 5
MN/CDM700.IOM
.
ENTER
.
.
ENTER
.
◄ ►
arrow keys. The value