Comtech EF Data CDM-700 Installation And Operation Manual page 90

CDM-700 High Speed Satellite Modem
Front Panel Operation
If Intfc1 Rx Data:
Intfc1 Rx Data Invert:
Normal
This feature has been added for compatibility with certain older equipment. Select Normal or
Inverted, using the
If Intfc1 Rx:
Intfc1 Rx Buffer:
Size
Select Size or ReCenter using the
If Intfc1 Rx Buffer:
Intfc1 Rx Buffer Size:
10.0 mSec (0343.680 Bits)
Edit the Rx Buffer Size by selecting the digit to be edited, using the
of the digit is then changed using the
mSecs in 0.1 mSec increments. Press
If Intfc1 Rx Buffer:
Intfc1 Buffer Fill:
(046%) ReCenter
The percentage (046%) indicates the current buffer fill status. Select ReCenter, using the
arrow keys, to reset the buffer to the midpoint (50%). Press
If Intfc1 Rx:
Intfc1 Rx Clock:
Source
Select Source or Invert using the
follows:
Invert is selected:
Inverted
◄ ►
arrow keys, to control data inversion. Press
Buffer is selected:
ReCenter (
◄ ►
Size is selected:
▲ ▼
ENTER
ReCenter is selected:
Clock is selected:
Invert (
◄ ►
( E)
E)
arrow keys. Press
ENTER
arrow keys. The range of values is from 5.0 to 32.0
.
( E)
ENTER
E)
arrow keys. Press
ENTER
6–36
Revision 5
MN/CDM700.IOM
.
ENTER
.
◄ ►
arrow keys. The value
.
. The selections are as
◄ ►