Table of Contents
Advertisement
2.1
Unpacking and Inspection
The CDM-700 modem and its Installation and Operation Manual are packaged and shipped in a
pre-formed, reusable cardboard carton containing foam spacing for maximum shipping
protection.
CAUTION
IMPORTANT
Unpack and inspect the CDM-700 as follows:
Step
Chapter 2. INSTALLATION
Do not use any cutting tool that will extend more than 1" into the
container and cause damage to the unit.
Be sure to keep all shipping materials for the carrier's inspection.
Inspect shipping containers for damage. If shipping containers are
1
damaged, keep them until the contents of the shipment have been
carefully inspected and checked for normal operation.
2
Remove the packing list from the outside of the shipping carton.
Open the carton by cutting the tape at the top of the carton (indicated
3
OPEN THIS END
by
Remove the cardboard/foam space covering the modem. Remove the
4
modem, manual and power cord from the carton.
Check the contents against the packing list to verify completeness of
5
the shipment.
Inspect the equipment for any possible damage incurred during
6
shipment. If damage is evident, contact the carrier and
Comtech EF Data immediately and submit a damage report.
7
Refer to the following sections for further installation instructions.
Procedure
).
2–1
Advertisement
Table of Contents
