Opening Screen; Select: (Main) Menu - Comtech EF Data CDM-700 Installation And Operation Manual

CDM-700 High Speed Satellite Modem
Front Panel Operation
6.2

Opening Screen

6.3

SELECT: (Main) Menu

The following menus are presented using CDI-10 G.703, CDI-60 HSSI, and
CDI-70 GbE Interfaces. The CDI-10 G.703 Interface is used to present all
menus. The difference is noted in (SELECT:) Config
IMPORTANT
interface is specifically referenced.
SELECT: Config
Test Info Save/Load Util
Move the cursor to the desired choice using the ◄ ► arrow keys, then press
following table describes the function of each menu branch:
Selection
Config
Monitor
Test
Info
Save/Load
Util
The opening 'welcome screen' shown here is
representative of what displays whenever power is first
applied to the unit (the Firmware Version may differ).
Pressing any key displays the top-level Select menu.
Monitor
Menu Branch Description
[Configuration] Provides selections for the desired Interface, Transmit,
and Receive operations
Permits the user to monitor the alarm status of the unit, to view the log of
stored events, and to display the Receive Parameters screen.
Permits the user to configure the modem into one of several Test modes,
example: CW and Loopback
[Information] Provides a summary/display of the Interface, Transmit,
Receive, and M&C configurations.
Permits the user to save and retrieve up to 10 different modem configurations.
[Utility] Permits the user to perform miscellaneous functions, such as
setting the Real-Time Clock, adjusting the display brightness, etc.
6–6
Revision 5
MN/CDM700.IOM
Intfc1, where each
. The
ENTER