(Config:) Intfc1 Hssi Rx - Comtech EF Data CDM-710G Installation And Operation Manual

CDM-710G High-Speed Satellite Modem
Front Panel Operation
If Intfc1 Tx
Intfc1 Tx Enable:
Enable Disable
Using the
to de-activate the Tx side and set the Data Rate to 0. Press
(CONFIG:) Intfc1 HSSI
Intfc1 Rx:
Data Buffer Clock Enable
Select Data, Buffer, Clock, or Enable using the
If Intfc1 Rx:
Intfc1 Rx Data:
Datarate
Select Datarate or Invert using the
If Intfc1 Rx Data:
Intfc1 Data Rate:
Rx: 032.000000 Mbps
This is a read-only status message that indicates the Data Rate of the received MPEG-2 transport
stream. Press
ENTER
If Intfc1 Rx Data:
Intfc1 Rx Data Invert:
Normal Inverted
To control data inversion (added for compatibility with certain older equipment), select Normal
or Inverted using the
If Intfc1 Rx
Intfc1 Rx Buffer:
Size Recenter
Select Size or Recenter using the
Enable is selected:
(
arrow keys, select Enable to activate the Tx side of this interface, or select Disable
Rx
Data is selected:
Invert (
Datarate is selected:
or to return to the previous menu.
CLEAR
Invert is selected:
(
arrow keys, then press
Buffer is selected:
(
E)
ENTER
arrow keys, then press
E)
arrow keys, then press
E)
.
ENTER
E)
arrow keys, then press
ENTER
6–28
MN-CDM710G
when done.
.
ENTER
.
ENTER
.
Revision 1