Intfc1 Gigabit Ethernet: Rx - Comtech EF Data CDM-700 Installation And Operation Manual

CDM-700 High Speed Satellite Modem
Front Panel Operation
Intfc1 Gigabit Ethernet:
Intfc1 Rx:
Data
Select Data or Enable using the
If Intfc1 Rx:
Intfc1 Data Rate:
Rx:075.000000 Mbps
Intfc1 Data Rate:
Rx:Disabled
Edit the Rx Data Rate by selecting the digit to be edited, using the
of the digit is then changed using the
Mbps. Note that the modem Symbol Rate limits of 1.0 to 64.0 Msps makes some choices of
Modulation Type, FEC Coding and Data Rate selection invalid. Once the Rx Data Rate is edited,
Press .
ENTER
If Rx: Disabled is displayed, the port is turned Off (0 Mbps).
If Intfc1 Rx:
Intfc1 Rx Enable:
Enable
This selection activates or deactivates the receive (Rx) side of this interface. Disabling the Rx
side deactivates it and changes the data rate to 0.
Select Enable or Disable using the ◄ ► arrow keys. Press
Rx
Enable (
◄ ►
Data is selected:
▲ ▼
Enable is selected:
Disable
E)
arrow keys. Press
ENTER
(E)
(E)
arrow keys. The range of values is from 1.0 to 155.0
( E)
ENTER
6–40
MN/CDM700.IOM
.
arrow keys. The value
◄ ►
.
Revision 5