I Memory Clearing - Icom IC-91A Instruction Manual

8
MEMORY/CALL CHANNELS

I Memory clearing

Contents of programmed memories can be cleared (blanked),
if desired.
qPush and hold [MR/S.MW] for 1 sec. to enter select mem-
ory write mode.
• 1 short and 1 long beeps sound.
• "µ µ
" indicator blinks.
• Do not hold [MR/S.MW] for more than 2 sec. otherwise the
memory contents will be copied to VFO.
wRotate [DIAL] to select the desired memory channel to be
cleared.
ePush [2/SCAN](∫ ∫ ) or [8/TS](√ √ ) to select "CLEAR."
r Push and hold [MR S.MW] for 1 sec. to clear the contents.
• 3 beeps sound.
• The cleared channel changes to blank channel
• Return to select memory write mode.— "µ µ " indicator blinks.
Push [VFO/MHz] to exit select memory write mode.
NOTE: Be careful!— the contents of cleared memories
CANNOT be recalled even in bank channel operation.
72
VFO mode
FM FM
145 870
A
PSKIP PSKIP
Push
for 1 sec.
Enter select memory
write mode.
FM FM
146 010
r
µ 000
BANK BANK :---- :----
MNAME: MNAME:
SKIP SKIP :OFF :OFF
Rotate [DIAL] to select
the desired channel.
145 000
r µ 005
BANK BANK :---- :----
MNAME: MNAME:
SKIP SKIP :OFF :OFF
Push or
to select CLEAR .
145 000
µ 005
MNAME: MNAME:
SKIP :OFF SKIP :OFF
CLEAR CLEAR
r
Push
for 1 sec. to clear.
r
µ 005
BANK :---- BANK :----
MNAME: MNAME:
SKIP :OFF SKIP :OFF
Push .
FM FM
145 870
A
PSKIP PSKIP
Return to the VFO mode.