Expansion Cards And Riser Cards; Safety Notes; Basic Information - Fujitsu PRIMERGY RX2450 M1 Upgrade And Maintenance Manual

9

Expansion cards and riser cards

9.1

Safety notes

CAUTION
▶
Do not damage or modify internal cables or devices. Doing so may
cause a device failure, fire, or electric shock.
▶
Devices and components inside the server remain hot after
shutdown. After shutting down the server, wait for hot components
to cool down before installing or removing internal options.
▶
Circuit boards and soldered parts of internal options are exposed
and can be damaged by static electricity. Always discharge static
build-up (e.g. by touching a grounded object) before handling
electrostatic-sensitive devices (ESDs).
▶
Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
▶
If devices are installed or disassembled using methods other than
those outlined in this chapter, the warranty will be invalidated.
▶
For more information, see
9.2

Basic information

There are two riser modules and one AOC card:
– Riser module 1 with riser card left
– Riser module 2 with ultra riser card
– AOC card in riser card right (has no riser module carrier)
Riser module 1:
Riser module 2:
Riser card right:
AOC card:
RX2450 M1
"Important information" on page
RSC-W2-66G4
AOC-2UR668G4-P
RSC-WR-6
AOC-SGP-I2
Upgrade and Maintenance Manual
25.
103