Kyocera Mita KM-1530 Service Manual page 96

Maintenance
item No.
U407 Adjusting the leading edge registration for memory image printing
Adjustment
See page 1-6-12.
U901 Checking/clearing copy counts by paper feed locations
Description
Displays or clears copy counts by paper feed locations.
Purpose
To check the time to replace consumable parts. Also to clear the counts after replacing the consumable
parts.
Method
1. Press the start key. The counts by paper feed locations are displayed.
2. Change the screen using the cursor left/right keys.
Display
BYPASS
FIRST
SECOND
THIRD
FORTH
DUPLEX
*Optional.
When an optional paper feed device is not installed, the corresponding count is not displayed.
Clearing
1. Select the count to be cleared using the cursor up/down keys. The selected item is displayed in reverse.
To clear the counts for all paper feed locations, select ALL using the cursor up/down keys.
2. Press the start key. The count is cleared, and the screen for selecting a maintenance item No. is
displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U903 Checking/clearing the paper jam counts
Description
Displays or clears the jam counts by jam locations.
Purpose
To check the paper jam status. Also to clear the jam counts after replacing consumable parts.
Method
1. Press the start key. The jam count is displayed by jam codes.
2. Change the screen using the cursor left/right keys.
Clearing
1. Select ALL using the cursor up/down keys. Jam counts cannot be cleared individually.
2. Press the start key. The count is cleared, and the screen for selecting a maintenance item No. is
displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
Description
Paper feed locations
Bypass tray
Upper drawer
Lower drawer
Optional drawer 1*
Optional drawer 2*
Duplex unit*
2AV/X
1-4
1-4-47