Kyocera Mita KM-1530 Service Manual page 80

Maintenance
item No.
U200 Turning all LEDs on
Description
Turns all the LEDs on the operation panel on.
Purpose
To check if all the LEDs on the operation panel light.
Method
Press the start key. All the LEDs on the operation panel light.
Press the stop/clear key or wait for 10 s. The LEDs turns off, and the screen for selecting a maintenance
item No. is displayed.
U203 Operating DF separately
Description
Simulates the original conveying operation separately in the optional SRDF.
Purpose
To check the SRDF.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Place an original in the SRDF if running this simulation with paper.
3. Select the item to be operated using the cursor up/down keys. The selected item is displayed in reverse.
Display
ADF
RADF
ADF (NON-P)
RADF (NON-P)
4. Press the start key. The operation starts.
5. To stop continuous operation, press the stop/clear key.
Completion
Press the stop/clear key when the operation stops. The screen for selecting a maintenance item No. is
displayed.
U204 Setting the presence or absence of a key card or key counter
Description
Sets the presence or absence of the optional key card or key counter.
Purpose
It is not necessary to run this maintenance item if a key card is installed on a 120 V specification machine. A
key card is not available for 220 – 240 V specifications.
Method
Press the start key.
Setting
1. Select the optional counter to be installed using the cursor up/down keys. The selected counter is
displayed in reverse.
Display
KEY CARD
KEY COUNTER
2. Press the start key. The setting is set and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
Description
Operation
With paper, single-sided original
With paper, double-sided original
Without paper, single-sided original (continuous operation)
Without paper, double-sided original (continuous operation)
Description
The key card is installed
The key counter is installed
2AV/X
1-4
1-4-31