Kyocera Mita KM-1530 Service Manual page 144

Maintenance
item No.
U348 Setting the copy density adjustment range
Description
Selects the adjustment range for copy density from NORMAL and SPECIAL AREA (for wider range).
Purpose
To change the setting according to user request.
When especially dark or light density is requested, set to SPECIAL AREA.
Method
Press the start key.
Setting
1. Select the density range using the zoom +/– keys.
Display
SPC (special area)
nrL (normal)
Initial setting: Normal
2. Press the start key. The setting is set, and the indication for selecting a maintenance item No. appears.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The indication for
selecting a maintenance item No. appears.
U402 Adjusting margins of image printing
Adjustment
See page 1-6-15.
U403 Adjusting margins for scanning an original on the contact glass
Adjustment
See page 1-6-38.
U404 Adjusting margins for scanning an original from the DF
Description
Adjusts margins for scanning the original from the DF.
Purpose
Used if margins are not correct when the optional DF is used.
Caution
Before making this adjustment, ensure that the following adjustments have been made in maintenance mode.
U402 U403 U404
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the item by lighting a copy exposure indicator using the copy exposure adjustment keys.
2. Change the setting using the zoom +/– keys.
Copy exposure
indicator
Exp. 1
Exp. 2
Exp. 3
Exp. 4
Increasing the setting makes the margin wider, and decreasing it makes the margin narrower.
Description
Description
11/15 steps (enlargement mode)
5/9 steps
Description Setting range
Left margin 0.0 to +10.0
Leading edge margin 0.0 to +10.0
Right margin 0.0 to +10.0
Trailing edge margin 0.0 to +10.0
Change in value
Initial setting
per step
2 0.5 mm
3 0.5 mm
2 0.5 mm
2 0.5 mm
2AV/X
1-4
1-4-95