Kyocera Mita KM-1530 Service Manual page 70

Maintenance
item No.
U093 Setting the exposure density gradient
Description
Changes the exposure density gradient in manual density mode, depending on respective image modes
(text, text and photo, photo).
Purpose
To set how the image density is altered by a change of one step in the manual density adjustment. Also
used to make copy image darker or lighter.
Start
1. Press the start key. The screen for selecting an item is displayed.
2. Select the image mode to be adjusted using the cursor up/down keys.
3. Press the start key. The screen for the selected item is displayed.
Display
TEXT
MIXED
PHOTO
Setting
1. Select the item to be adjusted using the cursor up/down keys. The selected item is displayed in reverse.
2. Adjust the setting using the cursor left/right keys.
Display
DARKER
LIGHTER
Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.
Image density
Dark
Light
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Interrupt copy mode
While this maintenance item is being performed, copying from an original can be made in interrupt copy
mode.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item
No. is displayed.
Description
Description
Density in text mode
Density in text and photo mode
Density in photo mode
Description
Change in density when manual density is set dark
Change in density when manual density is set light
Set to LIGHTER Set to DARKER
Light
Center
Density adjustment range: Normal
Density adjustment range: Special area
Figure 1-4-5 Exposure density gradient
Setting range Initial setting
0 to 3
0 to 3
Setting: 3 Setting: 0
Density adjustment
Dark
2AV/X
1-4
0
0
1-4-21