Kyocera Mita KM-1530 Service Manual page 200

2AV/X
• 15 cpm
Enter maintenance mode.
Enter "051" using the numeric keys.
Press the start key.
Press the image mode selection key to
light the text indicator or the photo and
text indicators.
Select the item to be adjusted using
copy exposure adjustment keys.
Press the interrupt key.
1-6
Press the start key
to make a test copy.
edge of the image missing
or varying randomly (copy
paper Z-folded (copy
Press the stop/clear key to
exit maintenance mode.
1-6-18
Start
G Image mode
G Copy exposure
Is the leading
Yes
example 1)?
No
Is the copy
Yes
example 2)?
No
End
Original
Photo
selection key
Text
Text indicator : Amount of slack at the
is on paper registration roller
adjustment keys
Setting 1 : Upper drawer
2 : Bypass tray
3 : Lower drawer (option)
Press the start key.
The new setting is stored.
Increase the value using the zoom (+) key.
Decrease the value using the zoom (–) key.
Setting range: –50 – +50
Initial setting: 0
Changing the value by 1 changes
the amount of slack by 0.32 mm.
The greater the value,
the larger the amount of slack;
the smaller the value, the smaller
the amount of slack.
Copy Copy
example 1 example 2
Figure 1-6-22b
G Image mode
Photo
selection key
Text
Photo and Text : Amount of slack at
indicators are on the feed roller
G Copy exposure
adjustment keys
Setting 1 : Optional drawer 1
2 : Optional drawer 2