Kyocera Mita KM-1530 Service Manual page 89

2AV/X
Maintenance
item No.
U256 Turning auto preheat/energy saver function on/off
Description
Selects if the auto preheat/energy saver function is turned on. When set to ON, the time to enter preheat/
energy saver mode can be changed in copy management mode.
Purpose
According to user request, to set the preheat time to save energy, or enable copying promptly without the
recovery time from preheat mode.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select ON or OFF using the cursor up/down keys. The selected item is displayed in reverse.
ON
OFF
1-4
Initial setting: ON
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
When the setting is changed from OFF to ON, the auto preheat time is set to the initial setting of 15
minutes.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
U258 Switching copy operation at toner empty detection
Description
Selects if continuous copying is enabled after toner empty is detected, and sets the number of copies that
can be made after the detection.
Method
Press the start key. The current setting is displayed.
Setting
1. Select single or continuous copying using the cursor up/down keys. The selected item is displayed in
reverse.
SINGLE MODE
CONTINUE MODE
Initial setting: SINGLE MODE
2. Set the number of copies that can be made using the cursor left/right keys.
Number of copies after toner empty detection
The setting can be changed by 5 copies per step.
When set to 0, the number of copies is not limited regardless of the setting for single or continuous
copying.
3. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
1-4-40
Display
Auto preheat/energy saver function on
Auto preheat/energy saver function off
Display
Enables only single copying.
Enables single and continuous copying.
Description
Description
Description
Description
Setting range
0 to 200 (copies)
Initial setting
70