Kyocera Mita KM-1530 Service Manual page 196

2AV/X
• 15 cpm
Enter maintenance mode.
Enter "034" using the numeric keys.
Press the image mode selection key
to light the photo and text indicators.
Select the item to be adjusted
using the copy exposure
1-6
Press the interrupt key.
Press the start key to output a test
pattern.
Press the stop/clear key to exit
1-6-14
Start
Press the start key.
adjustment keys.
No
Is the image correct?
Yes
maintenance mode.
End
Correct image
G Image mode selection key
Photo and text indicators : Center line adjustment
are on
G Copy exposure adjustment keys
Setting 1 : Upper drawer
2 : Bypass tray
3 : Lower drawer (option)
4 : Optional drawer 1
5 : Optional drawer 2
Press the start key.
The new setting is stored.
For output example 1, decrease
the value using the zoom (–) key.
For output example 2, increase
the value using the zoom (+) key.
Setting range: –5.0 – +5.0
Initial setting: 0
Changing the value by 1 moves the
center line by 1 mm.
Center line of printing
Output Output
example 1 example 2
Figure 1-6-21b
Photo
Text