Kyocera Mita KM-1530 Service Manual page 193

• 15 cpm
Start
Enter maintenance mode.
Enter "034" using the numeric keys.
Press the start key.
Press the image mode selection
key to light the text indicator.
Select the items to be adjusted
using the copy exposure
adjustment keys.
Press the interrupt key.
Press the start key
to output a test pattern.
Is the leading edge
registration correct?
Yes
Press the stop/clear key to exit
maintenance mode.
End
Correct image
G Image mode selection key
Text indicator
: Leading edge registration adjustment
is on
G Copy exposure adjustment keys
Setting 1: leading edge registration
Setting 2: Leading edge registration for when the paper
pauses at the registration roller
• After adjusting the leading edge registration for regular
operation (setting 1), be sure to adjust the leading edge
registration for when paper pauses at the registration roller
(setting 2).
Press the start key
The new setting is stored
For output example 1, decrease
the value using the zoom (–)
No
key.
For output example 2, increase
the value using the zoom (+)
key.
Setting range: –5.0 – +5.0
Initial setting: 0
Changing the value by 1 moves the
leading edge by 1.0 mm.
Leading edge registration
Output Output
example 1 example 2
Figure 1-6-19b
Photo
Text
2AV/X
1-6
1-6-11