Kyocera Mita KM-1530 Service Manual page 78

Maintenance
item No.
U158 Checking/clearing the developing count
Description
Displays the developing count for checking, clearing or changing a figure, which is used as a reference
when correcting the toner control. It is automatically cleared when U130 is executed.
Purpose
To check the developing count after replacing the developer.
Method
Press the start key. The developing count is displayed.
Clearing
1. Select CLEAR using the cursor up/down keys.
2. Press the start key. The count is cleared, and the screen for selecting a maintenance item No. is
displayed.
Setting
1. Enter a six-digit count using the numeric keys.
2. Press the start key. The count is cleared, and the screen for selecting a maintenance item No. is
displayed.
Completion
To exit this maintenance item without changing the count, press the stop/clear key. The screen for selecting
a maintenance item No. is displayed.
U161 Setting the fixing control temperature
Description
Changes the fixing control temperature.
Purpose
Normally no change is necessary. However, can be used to prevent curling or creasing of paper, or solve a
fixing problem on thick paper.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the item to be set using the cursor up/down keys. The selected item is displayed in reverse.
2. Change the setting using the cursor left/right keys.
Display
1ST TEMP
2ND TEMP
COPY TEMP
A4R TEMP
The respective temperatures are to be set such that 2ND TEMP
3. Press the start key. The value is set.
Completion
Press the stop/clear key. The screen for selecting maintenance item No. is displayed.
Description
Primary stabilization fixing temperature
Secondary stabilization fixing temperature
Control temperature during copying
Temperature to be deducted from the control
temperature when copying onto paper with
a width of 220 mm or smaller.
Description
Setting range
115 to 145 (°C)
135 to 190 (°C)
145 to 220 (°C)
0 to 50 (°C)
≥
1ST TEMP.
2AV/X
Initial setting
135
160
180
0
1-4-29
1-4