Kyocera Mita KM-1530 Service Manual page 215

• 15 cpm
Enter maintenance mode.
Enter "065" using the numeric keys.
Press the start key.
Select "1" (main scanning direction
using the copy exposure
adjustment keys).
Press the interrupt key.
Place an original and press
the start key to make a test copy.
Is the image correct?
Press the stop/clear key to
exit maintenance mode.
Start
G Copy exposure adjustment keys
Setting 1 : Main scanning direction
No
Yes
End
Original Copy
example
Figure 1-6-49b
2 : Auxiliary scanning direction
Press the start key.
The new setting
is stored.
For copy example 1, increase the
value using the zoom (+) key.
For copy example 2, decrease the
value using the zoom (–) key.
Setting range: –25 – +25
Initial setting: 0
Changing the value by 1 changes
the magnification by 0.1%.
Increasing the value makes
the image wider, and decreasing it
makes the image narrower.
2AV/X
Copy
example 2
1-6-33
1-6