Kyocera Mita KM-1530 Service Manual page 94

Maintenance
item No.
U348 Setting the copy density adjustment range
Description
Selects the adjustment range for copy density from NORMAL and SPECIAL AREA (for wider range).
Purpose
To change the setting according to user request.
When especially dark or light density is requested, set to SPECIAL AREA.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the density range using the cursor up/down keys.
Display
SPECIAL AREA
NORMAL
Initial setting: SPECIAL AREA
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
U402 Adjusting margins of image printing
Adjustment
See page 1-6-15.
U403 Adjusting margins for scanning an original on the contact glass
Adjustment
See page 1-6-38.
Description
Description
11/15 steps (enlargement mode)
5/9 steps
2AV/X
1-4
1-4-45