Kyocera Mita KM-1530 Service Manual page 100

Maintenance
item No.
U992 Checking or clearing the printer/fax count
Description
Displays, clears or changes the print count of the printer or fax when the optional printer board or fax unit is
installed.
Purpose
To check the frequency of use of the printer or fax.
Method
Press the start key. The print count of the printer and fax are displayed.
Setting
1. Select the count to be cleared using the cursor up/down keys.
2. Enter a six-digit count using the numeric keys.
To clear the counts for both printer and fax, press the reset key.
3. Press the start key.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U993 Outputting a VTC-PG pattern
Description
Selects and outputs a VTC-PG pattern created in the copier.
Purpose
When performing respective image printing adjustments, used to check the machine status apart from that
of the scanner with a non-scanned output VTC-PG pattern.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the VTC-PG pattern to be output using the cursor up/down keys.
Display
VTC-PG1
VTC-PG2
VTC-PG3
3. Press the interrupt key. The copy mode screen is displayed.
4. Press the start key. A VTC-PG pattern is output.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item
No. is displayed.
Description
PG pattern to be output Purpose
• Center line adjustment
• Lateral squareness adjustment
• Magnification adjustment
2AV/X
1-4
1-4-51