Kyocera Mita KM-1530 Service Manual page 133

2AV/X
Maintenance
item No.
U196 Turning the fixing heater on
Description
Turns the fixing heater on.
Purpose
To check fixing heater.
Method
1. Press the start key. "on" appears.
2. Press the start key. The fixing heater turns on for 1 s and then turns off.
Completion
Press the stop/clear key when fixing heater is off. The indication for selecting a maintenance item No. appears.
U199 Checking the fixing temperature
Description
Displays the fixing temperature and the ambient temperature.
Purpose
To check the fixing temperature and the ambient temperature.
Method
1-4
1. Press the start key.
2. Display each temperature by lighting the respective copy exposure indicator using the copy exposure
adjustment keys.
Copy exposure indicator
Exp. 1
Exp. 2
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
U200 Turning all LEDs on
Description
Turns all the LEDs on the operation panel on.
Purpose
To check if all the LEDs on the operation panel light.
Method
Press the start key. All the LEDs on the operation panel light.
Press the stop/clear key or wait for 10 s. The LEDs turns off, and the indication for selecting a maintenance
item No. appears.
U203 Operating DF separately
Description
Simulates the original conveying operation separately in the optional DF.
Purpose
To check the DF.
Method
1. Press the start key.
2. Place an original in the DF if running this simulation with paper.
3. Select the item to be operated using the copy exposure adjustment keys.
Display (copy exposure indicator)
d-P (exp. 1)
d-n (exp. 2)
4. Press the start key. The operation starts.
5. To stop continuous operation, press the stop/clear key.
Completion
Press the stop/clear key when the operation stops. The indication for selecting a maintenance item No.
appears.
1-4-84
Description
Description
Fixing temperature (°C)
Ambient temperature (°C)
Operation
With paper, single-sided original
Without paper, single-sided original (continuous operation)